| |
AUTOLOG is an optional program for the XPRT ALARM SENTRY
controller. It continuously performs intelligent refrigeration system
diagnostics for single compressor condensing units controlled by
XPRT1 controllers. One of it’s software routines can detect
a low refrigerant charge condition before the fixture’s temperature
is compromised. Other software routines can detect conditions that
will lead to oil failures. Still others monitor for faulty temperature
sensor and pressure transducer readings. Lastly, other routines
monitor the defrost and condensing setpoints. When any of these
software routines detects an anomaly, it will utilize the XPRT Alarm
Sentry’s fax or pager notification capabilities to notify
the appropriate personnel so the problem can be remedied before
food is at risk.
Features:
On watch around the clock
Alarm notification by XPRT Alarm Sentry
Detects problems before food is at risk
Detects low refrigerant charge
Detects conditions that might lead to a oil failure
Monitors for faulty temperature sensor readings
Monitors for faulty pressure transducer readings
Monitors for incorrect defrost setpoints
Monitors for incorrect condenser fan setpoints
|
|
AUTOLOG Service |
